RASCH LOADING RAMPS

It is designed to enable the passage of equipment such as truck loading area, cold air exit areas, forklift, pallet truck trolley to the container and case during loading, working with hydraulic system, hinged and telescopic, with a capacity of 6 – 6,5 – 8 – 10 tons, single and double It is roller level adjuster loading equipment. The loading ramp is generally used in factory storage areas and dispatch areas. In order to prevent the surface loading vehicle from slipping, the sheet metal is laid with tear pattern sheet metal. It is fully automatic. In places where the loading area is not suitable for the height of the truck, it moves in the form of a slope and allows you to enter the vehicle. There are ramp systems such as hinged ramp, vertical ramp, telescopic ramp, mobile ramp, mobile ramp placed in the pit.

1.Ramp platform features

1.1. Platform dimensions are 2000x2500mm.

1.2.Platform material is made of high quality steel with 6-7mm wall thickness

The sheet surface is patterned and prevents tire slippage.

1.3.Platform supports 120 NPI.

1.4.Ramp color is black and there are yellow stripes on the sides. Stay before the ramp

coat of Epoxy primer was applied and then painted with Epoxy paint.

1.5. There is a safety bar for maintenance.

1.6. The rise and fall of the platform is adjustable.

1.7. The piston shaft thickness that lifts the platform is minimum 50mm.

1.8. There is a hose burst valve on the piston that lifts the platform.

2. Ramp language features

2 .1. The hinged tongue length is 400mm minimum.

2 .2. The sheet used in the hinged tongue is 12-13mm thick, the sheet surface is patterned.

prevents tire slippage.

2 .3. The tip of the hinged tongue is angled to facilitate pallet truck and forklift exit.

2 .4. The piston rod used in the hinged tongue is at least 30mm thick and 140mm stroke.

3. Hydraulic system

3.1. There is a 380V 50Hz motor.

3.2.Motor power is at least 1,1 Kw.

3.3. Parts used in the hydraulic system (pump, valve, valve, etc.)

3.4. A 24V dc valve is used in the hydraulic system.

3.5. Operating temperature is minimum -20 +70 °C.

3.6.There is a thermal switch fuse in the control panel.

3.7.Control panel conforms to IP 55 protection class.

4.Ramp general features

4.1. The tongue can be closed with a separate button to prevent time loss while the ramp is in the air.

4.2. The maximum live load that will pass over the ramp is 6000 kg.

4.3. Rubber buffers are installed on both sides of the ramps.

4.4.The ramp is guaranteed for 2 years against all kinds of fabrication faults.